Check Your Bike Before You Rev It Up

Even the most careful of motorbike riders can sometimes forget to check their bike before they hit the road. And that can sometimes prove to be a very bad move. Even if you are careful to stick to the speed limits on your ride and approach other vehicles and maneuvers with as much caution as possible, there might be a problem with your bike that puts you at a considerable risk. And no amount of safe riding will be able to protect you if you don’t check your machine and miss something important that needs fixing or sorting out.

 

So, before you rev up your bike, there are always some checks that you need to carry out. Read on to find out more!

Check Your Bike Before You Rev It Up

Pexels.com

 

The Visual Check

 

First of all, before you get up close and personal with your bike, you should give it a quick once-over by just looking at it. This gives you the chance to see if there are any very visible things that might be up with it that would require some professional attention from a mechanic. So, what kinds of things should you look out for? First of all, make a note of anything that looks a bit loose or out of sorts. You might want to give these things a closer inspection. For instance, nuts and bolts can sometimes come loose after years of riding, but these can quickly be tightened by using the correct wrench. You might notice some dents in the body work as well. As long as these aren’t too bad, they shouldn’t put you in any danger when you are riding the motorcycle.

Check Your Bike Before You Rev It Up

Pexels.com

 

Fuel Levels

Before you drive off into the distance, it’s also a good idea to double check the level of fuel in your bike as well. You will probably have an idea of how much fuel you have left in your tank, but it is always a good idea to make sure before you leave on your trip. After all, you don’t want to end up stranded if you run out prematurely! Checking your fuel levels will also help you plan your ride. You will know whether you need to make a stop off at the nearest gas station!

 

The Tyres

You don’t want to have a bumpy ride because your tyres are a bit deflated, so it is always worth looking at them before you jump on the back of your bike. More often than not, though, there won’t be a problem with them as they are a lot more durable than what they once were. But that doesn’t mean you can stop checking them! Take a look at the surfaces of the tyre and the floor around them to make sure that there isn’t some glass, or a nail, or anything else that could cause a puncture once you start to ride off. You should also get a closer look of the tread. If it looks like your tyres are getting to be a bit too bald, then you should start to think about replacing them with new ones. It’s actually the law that you ride on tyres that have enough tread left on them. That’s because bald tyres are huge risks and could cause you to get into a pretty bad accident.

Check Your Bike Before You Rev It Up

Pexels.com

 

Oil Levels

Next, move your focus onto your bike’s oil levels. These days, the majority of bikes now have oil gauges on them so you can quickly check your levels. However, some still do not. If you are an unlucky rider whose modern bike doesn’t, or you ride a vintage bike, then you might have to get a bit dirty and use your dipstick to check the levels! If you notice that you are using a lot more oil than usual, your bike might be leaking. In this case, it’s a good idea to take it to a mechanic to get it checked out. Otherwise, it should be safe enough for you to top up your oil on your own.

 

 

Lights

Did you know that the majority of people who end up in an accident and needing to deal with accident lawyers like Craig Swapp & Associates have ended up crashing because of poor visibility? This is especially the case at nighttime when the light is poor. So, it’s always necessary to check your lights to make sure that they are working properly. If they seem a bit dim or aren’t turning on at all, you should replace the bulbs immediately. Don’t just check your headlamps and brake lights, though. It’s important to check every single light on your bike, even the indicators!

 

Cable Connections

Do you know what all the cables on your bike are connected to and why they are important? If not, it’s time you learned a bit more about them! That’s because each and every one of those cables is very important in the running of your bike. If there is a fault with one, then there is no way your bike will work. And you don’t want a fault to occur while you are riding it! So, make sure you know what your cables are for and that you check them all before you start to rev up. Sometimes, you won’t be able to see a problem with the bike’s cables. You will need to turn the machine on to hear if there is anything wrong with things.

Check Your Bike Before You Rev It Up

Pexels.com

 

Brakes

Finally, you need to make sure that the brakes are working as they should be. Otherwise, you could be in big trouble when you are on your bike! To test them, simply sit on the bike and nudge it forward so it starts to roll. Then use your brakes. If the bike comes to a halt, then everything is perfectly fine!

 

Whatever you do, don’t forget to carry out all these checks before you rev up your bike and head out on an adventure. Otherwise, you never know what kind of trouble you might end up in on the road.

Leave a Reply

Your email address will not be published. Required fields are marked *